I have the following diameters available (industry standard is a 1.03):

(.920)
(.930)
(.960) not available in straight 13"
(.980) not available in straight 13"
(1.00)
(1.03)
(1.06)
(1.07)
(1.08)

These diameters are available in all styles of the In Tow Team handles.


If you are not sure what diameter handle you are using now then take a
soft tape measure or cut out a strip of paper and wrap it around a part
of the handle that is not worn. The middle of the handle is usually a good
place to measure. Be sure and pull the tape measure tight or if using a
strip of paper mark where the paper meets and then measure the strip
of paper with a ruler. The measurment around a standard (1.03)
diameter handle is 3 3/8". E-mail me your measurment and I can tell
you what diameter your handle is.


Ty Oppenlander: Team 12" (1.07) polypro rope with (3) tubing

Nick Parsons: Team 13" (1.06) spectra rope with (3) tubing

Will Asher: Team 12" (1.06 and 1.08) spectra rope with short sleeves
and long sleeves

All are strung up rope exposed around the grommet.